New Model Construction Tools in UDEC

Easy Model Stress Initiation (GUI/GIIC)

  • Topographic in-situ stress initialization - specify stress gradient - allows you to start out close to equilibrium with the fewest number of blocks or zones or risking artificially activating/shearing more shallow joints by using an initial average in-situ stress value.
  • Automatic stress initialization permits you to define stress at a point directly (e.g., in-situ stress measurement) to define stresses for the entire model (in-situ and boundary commands).

Block Generation (GUI/GIIC) Block Generation (GUI/GIIC)

Built-in automatic block generation commands to create bricks (left) and asymmetric Voronoi blocks (default Voronoi with 1:1 ratio, top right, compared to asymmetric Voronoi at a 1:3 ratio, bottom right).

Geometry Logic

The geometry logic allows the user to create, import, and export geometric data. These data can be used to interact with the model in a variety of ways. The data can be used as a filter with the range logic, and as a visualization aid with plotting. FISH extra variables and group names may be assigned to geometric data. FISH may be used to create and manipulate the data. The geometric data are organized into geometric sets, which are named collections of nodes, edges, and polygons. The geometry import command is used to import geometric data from a file that can be of type STL, DXF, or the Itasca geometry format.

Import DXFs (GUI/GIIC)

Using the Geometry logic, you can now import and use DXF files for UDEC model construction with automatic conversion of geometry into crack commands. DXFs are required to be watertight and of good quality. Some interactive DXF clean-up tools are available in the GIIC. You can see the workflow in the following diagram.

Enhanced Ground Support

In addition to improved visualization (GUI) for structural elements, a rock support database, including fully grouted bolts, end-anchor bolts, Swellex bolts, and split-set bolts (GIIC) is included. More examples for replicating manufacturer pull-test results have also been included (GUI/GIIC) to aid with model calibration.


Latest News
  • 2021 Tekne Award Work on machine learning to advance safety and efficiency in wind energy construction earned a...
    Read More
  • Itasca Software now Available for Linux Version 7 or greater of Itasca software (FLAC3D, 3DEC, PFC3D, and PFC2D) are now operable...
    Read More
  • Model Plot Contest Winners Itasca is pleased to announce the winners and honorary mentions of our Model Plot Contest...
    Read More

Upcoming Events
1 Feb
SPE Hydraulic Fracturing Technology Conference and Exhibition
The SPE Hydraulic Fracturing Technology Conference and Exhibition showcases existing and new hydraulic fracturing technologies, using e... Read More
7 Feb
Stanford Geothermal Workshop
The Stanford Geothermal Workshop bring together engineers, scientists and managers involved in geothermal reservoir studies and develop... Read More
14 Feb
Global Waste Management Symposium (GWMS)
Global Waste Management Symposium (GWMS) is a technical conference for research and case studies on waste management.... Read More