Structural Elements

An important aspect of geomechanical analysis and design is the use of structural support to stabilize a soil or rock mass (i.e., restrict displacements in the immediate vicinity of an excavation or slope). 3DEC 5.2 included four reinforcement types:

  • Local reinforcement at joints (e.g., dowels)
  • Global reinforcement (e.g., cables)
  • Beams
  • Surface Support (e.g., liners; as an added option)

3DEC 7 retains the original local reinforcement at joints. But it now also offers (at no extra cost):

Hybrid Bolts

3DEC hybrid bolts are a new structural element developed to reproduce both the shear and axial behavior of rock bolts, such as fully grouted rebar, cable bolts, and split sets. Hybrid bolts combine a conventional cable element that models the axial behavior with local shear springs (dowels) at fracture intersections that model the shear resistance induced by the presence of the bolt system (steel and grout). Both elements can yield and rupture, reproducing the three stages of load response (elastic, yield, and plastic stages) typically observed in laboratory tests.

3DEC model of a supported tunnel using hybrid bolts. The bolts are contoured based on axial force with the block contours representing displacements. The dowels (at joint intersections), colored by shear force, are also shown.

The hybrid bolt model properties are typically calibrated through simple shear and pullout tests on bolts perpendicular to the joint.

To assist with calibration, a calibration tool for hybrid bolts, shown below, is provided to make it easier to choose bolt properties based on laboratory data.

See it here: Bolt Calibration Tool

The tool provides:

  • Interactive controls
  • Default properties for different bolt types (e.g., rebar, split set, Swellex, and cables)
  • Force/displacement data import
  • 3DEC command generator
  • Save/load parameters
  • Documentation
Interactive calibration tool to determine hybrid bolt properties based on laboratory data.

Latest News
  • Itasca Celebrates 40 Years Itasca is celebrating 40 years of solving geomechanical and hydrogeological challenges through engineering and computer...
    Read More
  • Stability and Stress-Deformation Analyses of Reinforced Slope Failure at Yeager Airport This paper describes the material properties along with the inverse limit-equilibrium and permanent deformation analyses...
    Read More
  • Computers and Geotechnics: Scott Sloan Best Paper Award for 2019 Itasca is pleased to congratulate Dr. Branko Damjanac and Dr. Peter A, Cundall for their...
    Read More